CHEMICALS FOR SCR
AND SCRUBBERS SYSTEMS
From 2013, Blutec started to actively support all clients that adopted new emissions control technologies (SCR and Scrubbers plants) by creating a special supply chain network for alongside Truck and Tank Truck supplies.
CAUSTIC SODA | NaOH50%
A 50% Sodium Hydroxide Solution is used with many SOx Abatement technologies, mainly Scrubber Systems that are located in the exhaust. By spraying a Caustic Soda solution, mixed with fresh water onto the exhaust gas, up to 97% of SOx emissions can be reduced. Usually supplied by tank trucks.
Additive for Scrubber Systems
UREA - MARINE SOLUTION
Urea – Marine Solution is a 40% urea solution used with NOx abatement technology, mainly Selective Catalytic Reduction (SCR). Usually supplied by tank trucks.
urea - marine solution
Additive for SCR systems
MAGNESIUM OXIDE | MgO
Scrubbers working with Magnesium Oxide as alkali in closed loop are considered safer than those with caustic soda required. MgO is supplied as powder, 25kg bags or 1000kg big bags. Operational cost using Magnesium Oxide will be cheaper than corresponding cost of using Caustic Soda, as Magnesium is a superior alkali when operating in zero washwater discharge areas (ports/coastlines).
magnesium oxide caustic
Additive for Scrubber System
MAGNESIUM HYDROXIDE SLURRY / Mg(OH)2
Magnesium Hydroxide Slurry is a highly efficient aqueous suspension based on natural magnesium hydroxide for pH control and cleaning of waste water and flue gasses. Aquaprox MGS® is usually supplied in 1500kg IBCs.
magnesium hydroxide slurry
MAGNESIUM HYDROXIDE AQUEOUS SUSPENSION FOR ENVIRONMENTAL APPLICATIONS
COAGULANTS AND POLYELECTROLYTE
A complete range of coagulants and polyelectrolyte flocculants are available for SCRUBBERS’ waste water treatment plants.